Large manufacturing company in the Glenwood area searching for someone to fill their Safety Director role. The Safety Director will be working directly with employees out on the floor to ensure proper safety policies and procedures.
Job duties are as follows:
Be familiar with OSHA rules and regulation.
Be familiar with environmental rules and regulations.
Provide training for employees and supervisors.
Handle work comp cases and accident reports.
Assume some HR duties.
- Successfully complete a pulmonary function test.
- Be able to follow directions to determine what color parts get painted.
- Examines and feels surface for defects.
- Determine what process should be used when cleaning and hanging parts.
- Use a variety of hand tools and machines.
- Starts grinder and moves it over surface to remove scratches, excess weld material and burrs.
- Performs light maintenance and is able to make minor repairs to equipment used.
- Removes worn abrasive discs, wheels and belts and sharpen chisels and scrapers.
- Shovels or pours abrasives such as sand, grit, or shot of specified grade into machine hopper.
- Operates sandblasting machine to clean surfaces prior to painting or coating.
- Be able to move parts in and out of area.
- Lift up to 60 lbs. frequently/100 lbs. occasionally
We are holding a job fair at WASP on 10/2/2013 from 1p-4p. Located at: 20631 Hwy 55 E, Glenwood, MN 56334.
Requirements
Be familiar with OSHA and environmental rules and regulations.
Be willing to attend additional training sessions.
Be able to present information to a group of people.
Division: Pro Staff
Job ID: 500145173
Job duties are as follows:
Be familiar with OSHA rules and regulation.
Be familiar with environmental rules and regulations.
Provide training for employees and supervisors.
Handle work comp cases and accident reports.
Assume some HR duties.
- Successfully complete a pulmonary function test.
- Be able to follow directions to determine what color parts get painted.
- Examines and feels surface for defects.
- Determine what process should be used when cleaning and hanging parts.
- Use a variety of hand tools and machines.
- Starts grinder and moves it over surface to remove scratches, excess weld material and burrs.
- Performs light maintenance and is able to make minor repairs to equipment used.
- Removes worn abrasive discs, wheels and belts and sharpen chisels and scrapers.
- Shovels or pours abrasives such as sand, grit, or shot of specified grade into machine hopper.
- Operates sandblasting machine to clean surfaces prior to painting or coating.
- Be able to move parts in and out of area.
- Lift up to 60 lbs. frequently/100 lbs. occasionally
We are holding a job fair at WASP on 10/2/2013 from 1p-4p. Located at: 20631 Hwy 55 E, Glenwood, MN 56334.
Requirements
Be familiar with OSHA and environmental rules and regulations.
Be willing to attend additional training sessions.
Be able to present information to a group of people.
Division: Pro Staff
Job ID: 500145173